Beli rolling door di monotaro.id

Selimut pemadam api darurat

INOPLAST DT is a kind of double face tape that has weather resistance and waterproofs strongadhesive with polyethylene net carrier. It has an ideal property for temporary fixing, joint sealingof building materials, and fixing of flooring materials for out door use.1. Structure- Butyl Reubber PSA- PE NET Backing- Release Paper Liner2. Application・Temporary fixing of exterior wall material, and waterproof packing of joints・Waterproof sealing around interior plumbing・Waterproof sealing of waterproofing sheet joint, skirt, or drain at rooftop・Joint sealing of roofing membrane・Waterproofing around window frame for residential house3. Adhesive properties- Adhesion : In accordance with JIS Z 0237(2009)- Values in ( ) are referential values from manufacturer- Ball tack : In accordance with manufacturer- Tensile and elongation: In accordance with JIS Z 0238(2009)- Measuring conditions : Temp.23°C Humidity 65%RH- Tensile strength：In accordance with JIS Z 1524 Article 7-9 (Interval: 125mm Peeling speed300mm/min)- Elongation : % of elongation at break- Adhesion : JIS Z 1528 Article 6-7 (180°peeling)- Applying conditions : One reciprocation by metallic roller (2kg load, diameter 83mm, width45mm), which iscovered by rubber (hardness 80Hs, 6mm thick) at the speed of 300mm/min.- Peeling conditions: Peeling by 180°peel at the speed of 300mm/min after 20mins or more fromapplication. Peeling resistance force to be adhesion.4. Temperature dependency of adhesion- Test plate : Stainless plate- Test method : Application of specimen at conditions of 23°C and 65%RH. Keep the specimen at each temperature for 20mins. Specimen to be peeled off at each temperature by 180°peeling.5. Variation per time (Cycle test)- Test plate : Stainless plate- Test method : Tape to be applied at 23°C, 65%RH.- Condition 1 : Thermostatic chamber at 80°C- Condition 2 : Water tank at 20°C- Specimen to be placed in condition 1 and 2 everyday (Cycle). After certain elapsed days,- specimen to be kept under the circumstance of 23°C, 65%RH for 2hrs. Then adhesion to bemeasured by 180°peeling.- Remarks: No change in appearance (such as cracking, etc.) in this test- Adhesion of inoplast DT increases as times elapse. Furthermore, no decline of adhesioneven under water or rapid change of temperature.6. Heat resistance propertyTest method : Specimen to be applied to glass plate vertically. Visual observation of appearance of specimen, which is placed in each temperature condition inside thermostatic chamber (50, 75, 100°C, and 120°C) after certain days. Inspection items: Adhesive flow, generation of crack, and shrinkage of tape7. Cold resistance propertyJudgment criterionA : Nothing peculiarB : Slight declination of flexibility, but no peel offC : No flexibility and break off of tape, but no peel offD : No flexibility and break off of tape, and tape peel offTest method : In accordance with Fed. Method Std. №101B Method 2051Specimen to be applied to polyethylene film or Kent paper at normal temperature. Keep it under 65°C for 24hrs. Then keep it under each low temperature for 2hrs or more. Then roll it on iron bar which was also chilled under the same condition as specimen. Observe specimen’s appearance. (Operation was also done in the same cooling conditions) Inoplast DT performs its adhesion good enough under low temperatures.8. Weather resistance Test method : Weather-O-Meter conditions: 18mins of rain in 120mins cycle 25mm width specimen to be applied to stainless plate at room temperature. Appearance, tensile strength, and elongation of specimen were measured after exposed to sunshine carbon weather-o-meter (WE・SUN-HC). No declination of adhesion of inoplast DT even after long term outside use. Furthermore, its adhesion even tends to increase in such condition. Moreover, no cracking, nor shrinking were found.9. Precautions for use- Please apply tape after removing dirt, dust, moisture and oil from the surface since enough adhesion is not obtainable if the surface is stained.- Please press firmly after applying the tape to obtain enough adhesion.- For the keeping of tape, please avoid direct sun-ray and the heat sources as heating equipment and store it at cool place.- Please do not use for electrical insulation purpose other than electrical insulation tape.- Please do not apply directly to the car body, furniture, walls, glass and PVC products since causing of discolor, adhesive residue, and paint peel-off.- Since adhesive residue and rash may be caused by using of other tapes than adhesive tape for skin, please do not apply the tape to the skin directly.- Please test well before actual use as tape may contaminate or leave adhesive depending on type of adherend.- Please consult us for special application.- Described values are examples of measured values, and not guaranteed values.- The lead-time varies by conditions. Please inquire us for obtaining updated information.- Specification may be subject to change without prior notice.- Please verify whether the tape is suitable for your application before use.- We cannot be held responsible for any damage incurred as a results of using. Please use after enough confirmation.

Fire Blanket Fiberglass 150 x 180 cm

Hi-Cook Fire Blanket/Selimut Api. Fire blanket dapat menjadi perlengkapan pemadam kebakaran yang sangat efektif. Selain sering digunakan oleh pemadam kebakaran untuk menolong orang yang terjebak api dengan cara menutupi atau membungkusnya, fire blanket juga bisa digunakan untuk memadamkan api yang terkadang sulit dipadamkan oleh air, misalnya api akibat minyak dan korsleting listrik. Kain Fiberglass cloth/kain fiberglass dibentuk dari benang fiber yang ditenun jadi kain. Fiberglass cloth/kain fiberglass dapat digunakan sebagai pengganti asbes dan sangat efisien sebagai bahan peredam panas sampai panas maksimal 550 derajat celcius.

-Left and right hand combinations/door closing speed is adjustable.-The stop angle can be set from 70 to 180degree.-For Hinged Door .-With stop function-Hinged door draw-in type-Parallel type

Selimut api adalah perangkat keselamatan yang dirancang untuk memadamkan kebakaran yang baru terjadi. Ini terdiri dari selembar bahan tahan api yang ditempatkan di atas api untuk memadamkannya.Fire Blanket atau selimut Pemadam Api berfungsi untuk memadamkan api dengan cara tutup langsung ke sumber api atau melindungi diri disaat kebakaran .Atau bisa juga difungsikan sebagai tatakan/ pelapis lantai workshop yg berminyak supaya tidak terjadi pijaran api pada saat pengelasan atau pemotongan besi. Dan untuk berbagai kebutuhan industri lainnya.

Spek pintu : Pintu kayu, kaca, besi, alumunium

Fire Blanket / Selimut Api Tonata 1 x 1 mSelimut api Tonata dapat digunakan untuk pemadaman kebakaran tahap awal sebelum api membesar. Jika terjadi kebakaran besar, selimuti badan dan kepala untuk keluar dari zona api!

Aksesoris :- Kawat Nyamuk (Terpasang)- Kaca Warna Hijau (Terpasang)

For opening doors.

For opening doors.